Ricoh Aficio 340 System Settings page 434

FACSIMILE USER TOOLS
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Prev.] or [ Next].
E
Enter the function number for
"Forwarding" using the number
keys.
F
Enter the function number for
"Delete Receiver" using the num-
7
ber keys.
G
Choose the receiver (Forwarding
Station) to delete by entering its
code number.
Note
If you make a mistake, press
[No] and enter a correct number.
H
Press Yes.
178
Note
If you press No, the Forwarding
Station is not deleted and the
display shown in 5 appears
again.
I
Press [Yes].
The Forwarding Station is deleted.
Note
When you press [No], the For-
warding Station is not deleted
and the display shown in 5 ap-
pears again.
J
Press [PrevMenu] 3 times.
K
Press the { { { { User Tools/Counter} } } } key.
Registering Specific Senders
(Forwarding)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the { { { { Fax} } } } key.
ND2C0104
ND1X03E0