Product Documentation - VERITAS NetBackup 523 Installation Manuals

Product documentation

Storage Shelf rear panel (continued)
Table 1-6
Number Element
6 Power supply LED
Note: When the Veritas Storage Shelf starts, the primary I/O module (on the left
side of the rear panel) starts first. Its LED turns green a few seconds after the start.
The LED of the secondary I/O module (on the right of the rear panel) starts after
the primary module is operational.
This document is available to customers and end-users.
The following tables describe the hardware and software documents that are
available at the following site.
NetBackup Appliance documentation
NetBackup Appliance and Storage Shelf hardware-related
Table 1-7
documentation
Document
Product Description
Safety and Maintenance Guide
NetBackup Appliance and Storage Shelf software-related
Table 1-8
documentation
Document
Initial Configuration Guide
Details
Not lit - power is not detected
Solid green - power is ok
Flashes green - power supply is not turned on
Red - power cannot be turned on
Description
Describes all aspects of the appliance and the attached
storage shelf. Provides general safety, compliance, and
environmental information.
Provides detailed safety information. Provides the
guidelines for routine monitoring and physical
maintenance of the appliance.
Description
Provides information to set up the appliance in your
network and to create storage partitions.
Introduction
Product documentation
15