Emerson LMS1000 User Instructions page 60

Section 5847
Issue AL, July 24, 2006
CHANNEL NUMBER
Page 2-40
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Fuse [Breaker] [Plug In] nn-01 Load
through
Fuse [Breaker] [Plug In] nn-47 Load
Note that there are no even channel numbers
for distribution elements. Each element takes
up two positions per pole. The channel
number for the element is the lowest position
Ann01
number used. For example: For a single pole
through
element in distribution panel #2 in position 25
Ann48
and 26, channels are A0125 and B0125. For a
double pole element in positions 27-30,
channels are A0127 and B0127. For a triple
pole element in positions 31-36, channels are
A0131 and B0131. For a quad pole element in
positions 37-44, channels are A0137 and
B0137.
Ann49 reserved
Ann50 reserved
Ann51 PCU nn-01 Load
through through
Ann60 PCU nn-10 Load
Ann61
through reserved
Ann90
I/O Board bb-ss Load (bb = LPS Bay #, ss =
Ann91
LPS Bay Slot #)
Table 2-3 (cont'd on next page)
LPS Interface Analog and Binary Channels
For LPS Bay Nodes (nn = 1-20)
Chapter 2. Operating LMS1000
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
CHANNEL NAME
User Instructions