This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

Uploading the Configuration from a PC to the LMS1000 using TFTP

a) Start a separate TFTP client session on the host from which the

configuration file is transferred.

b) Log onto the system using the default level six password (6).

c) Enter the command UPLOAD TFTP, then press ENTER. The following

will be displayed.

UPLOAD using TFTP

d) After seeing the above prompt, start the upload process from the client.

DO NOT ATTEMP THE UPLOAD UNTIL THE PROMPT ABOVE IS

DISPLAYED.

1) Enter the NODE LIST command and verify all nodes that were previously present

are still present.