Using The Door Access Controller Interface (When 586505000/586505500 List 80 Installed); Using The External Gps Modem Interface (When 586505000/586505500 List 84 Installed) - Emerson LMS1000 User Instructions

Section 5847
Issue AL, July 24, 2006
USING THE DOOR ACCESS CONTROLLER INTERFACE
(WHEN 586505000/586505500 LIST 80 INSTALLED)
Refer to the documentation furnished with the Door Access Controller.
Note that two events are added to the Event Log ('key code nn validated' and 'invalid key
code entered').
Note also that two Programmable Commands may have been configured to manually
lock and unlock the Access Door via LMS if the Door Access Controller should fail.
The following LMS binary channels are added.
USING THE EXTERNAL GPS MODEM INTERFACE
(WHEN 586505000/586505500 LIST 84 INSTALLED)
Refer to the documentation furnished with the GPS Modem.
The LMS operates at 19200, n, 8, 1.
Page 2-60
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Channel
Channel Name
Number
B7001 DAC Communications Failure
B7002 Strike Failed
B7003 Forced Entry
B7004 DAC PIN List Invalid
B7005 Door Open
Chapter 2. Operating LMS1000
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
User Instructions