Emerson LMS1000 User Instructions page 317

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
SET UNIT
Description: Allows changing of the system unit name, unit number, system identifier,
unit header, unit pager code, and pager delay.
Command Level: 6
Syntax: SET UNIT
Comments: The current system unit name, unit number, system identifier, unit header,
unit pager code, and pager delay is first displayed, and then a new system unit name (30
characters maximum), unit number (maximum four digits), system identifier (20
characters maximum), unit header (79 characters maximum), unit pager code (allowable
characters are *, # , and digits), and pager delay (0-99) can be entered, if desired. If the
current system unit number is satisfactory, pressing the return or enter key on the
terminal cancels the command.
The system unit name and unit header is displayed when remote access is granted. The
unit name, unit number, unit header, and system identifier are always displayed when a
user logs on to the system, or when an alarm report is made. The pager delay
determines the time delay in seconds between the last digit dialed in a pager phone
number and outputting the pager PIN number.
The system identifier parameter applies only to TL1 commands/messages. This is a
unique name which identifies the system in an NMA system. This data parameter is used
to identify the destination of command messages and the source of response and
autonomous messages in an NMA system. This parameter does not appear if the
system is not equipped with the TL1 software option.
Notes: The use of this command causes an entry in the events log.
Related Commands: UNIT
Example:
Command<6>: SET UNIT
LMS1000 v1.0.0
Unit Name: Central Office - Unit #1
System Identifier:
Unit Header:
THIS IS THE UNIT HEADER
Unit Pager Code:
Pager Delay:
Unit Name: Lorain Engineering
Unit #1
System Identifier (SID):
Unit Header:
THIS IS THE UNIT HEADER
Unit Pager Code: 216-288-1122#
Pager Delay:
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SE UN
Chapter 3. Commands
Section 5847
Issue AL, July 24, 2006
Page 3-235