Emerson LMS1000 User Instructions page 310

Section 5847
Issue AL, July 24, 2006
SET SYSTEM
Description: Programs system and user configuration parameters.
Command Level: 6
Syntax: SET SYSTEM
Comments: This command combines the function of several SET commands, allowing
system and user information to be entered via a single command. The SET SYSTEM
command is explained in detail in the Configuration Chapter of the separate Installation
Manual.
Notes: Channel configuration parameters are set using the CONFIG command.
Related Commands: CONFIG
Example:
Command<6>: set system
Date is 08/17/01.
Use Format mm/dd/yy
Time is 11:39:28.
Use Format hh:mm:ss
LMS1000 V1.0 CRC: 1F1C26EB
Unit Name: Central Office - Unit #1
System Identifier(SID):
Unit Name:
Unit #
System Identifier(SID):
Unit Header:
Unit Pager Code:
LMS1000 V1.0 CRC: 1F1C26EB
Unit Name: Central Office - Unit #1
System Identifier(SID):
Rings before answer: 1
Enter New #:
Rings before answer: 1
USER NO. 1 CONFIGURATION
Name: User #1
Password: 1
Access Level: 1
Callback: No
Page 3-228
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
SE SY
Occurred Alarm Report: No
Retired Alarm Report: No
Persistent Alarm Report: No
Persistent Alarm Report Period: 0m
Chapter 3. Commands
User Instructions