Emerson LMS1000 User Instructions page 336

Section 5847
Issue AL, July 24, 2006
SET VORTEX SYSTEM 25APLACES
Description: Sets the number of 25A PCU mounting positions available (filled and
empty) in the VPS.
Command Level: 6
Syntax: SET VORTEX SYSTEM 25APLACES
Comments: The current value is displayed, followed by a prompt to enter a new value.
Notes: The following message is displayed if the setting was not accepted by the MCA:
Power system did not accept the new value, setting remains
unchanged.
Related Commands: none
Example:
Command<6>: SET V SYS 25APLACES
Total 25A Places: 0
Total 25A Places:
Page 3-254
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
SE V SY 25A
Chapter 3. Commands
User Instructions