Emerson LMS1000 User Instructions page 383

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
SNMP ON
Description: Enable SNMP access.
Command Level: 6
Syntax: SNMP ON
Comments: This command enables all access to the unit via SNMP. The unit responds
to SNMP requests and will permit a TRAP be sent.
Notes: Enables access to the system through the Ethernet port via an SNMP browser.
Access to the system can be disabled by issuing the local command SNMP OFF.
Related Commands: SNMP
Example:
Command<6> : SNMP ON
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SNMP GET
SNMP OFF
SNMP SET
Chapter 3. Commands
Section 5847
Issue AL, July 24, 2006
Page 3-301