Network Initialize - Emerson LMS1000 User Instructions

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)

NETWORK INITIALIZE

Description: Clears node 0, nodes 21-89, and any X (unmapped) nodes from the
database, and then adds all nodes found on the I/O network.
Command Level: 6
Syntax: NETWORK INITIALIZE
Comments: The system prompts the user to continue. If YES answered, all known
nodes are deleted. The system then prompts the user if all associated channels are to
be removed. The system then displays all nodes currently found on the network.
Notes: Use of this command generates an entry in the Event Log. This cancels any
previous node errors. The Main Cabinet and Vortex Interface (MCA) Nodes do not
require discovery. The Main Cabinet and MCA hardware is discovered by other
mechanisms.
"IO network is running." is displayed when the network is ready. The follow are displayed
if the network is not ready.
Related Commands: none
Example:
Command<6>: NETWORK INITIALIZE
IO network is running.
WARNING: This command will terminate all alarm processing of remote I/O
Do you wish to continue? (YES or NO): yes
Do you wish to delete associated channels? (Yes or No): yes
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
N IN
"IO network is adding nodes.
IO network commands not ready!"
Indicates a new IO network is being discovered.
"IO network is verifying nodes.
IO network commands not ready!"
Indicates a known network is being verified.
"IO network is failed.
IO network commands not ready!"
Indicates an IO network has failed and no communication to nodes is possible.
"IO network is not initialized.
IO network commands not ready!"
Only displayed for a very short time after a reset.
"IO network state is undefined!
IO network commands not ready!"
Only displayed for a very short time after a reset on a new system.
Chapter 3. Commands
Section 5847
Issue AL, July 24, 2006
Page 3-103