Emerson LMS1000 User Instructions page 332

Section 5847
Issue AL, July 24, 2006
SET VORTEX SUBSYSTEM FACTORYCAL
Description: Resets the VPS "subsystem voltage" calibration to the factory default
value.
Command Level: 6
Syntax: SET VORTEX SUBSYSTEM FACTORYCAL
Comments: None
Notes: The following message is displayed if a subsystem is not installed.
No Subsystem Installed
Related Commands: none
Example:
Command<5>: SET V SUBSYSTEM FACTORYCAL
Subsystem calibrate voltage set to Factory default setting.
Page 3-250
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
SE V SU FACTORY
Chapter 3. Commands
User Instructions