Emerson LMS1000 User Instructions page 423

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
LMS1000 Response Format Variations:
<ntfcncde>
This is the notification code parameter associated with a single alarm condition given in
this block. Valid values are the same as for the input format. Values are derived from
the NOTIFICATION CODE attribute of the LMS1000 channel or limit configuration with
which the alarm condition is associated.
<almtype>
This is the alarm type parameter associated with the environmental alarm given in this
block. Values are derived from the CONDITION TYPE attribute of the LMS1000 channel
or limit configuration with which the alarm condition is associated.
<ocrdat>
This is the date when the triggering event occurred. The format for this parameter is
MOY-DOM (Month-Of-Year - Day-Of-Month). MOY ranges from 1 to 12, and DOM
ranges from 1 to 31. A NULL value for this parameter defaults to the current date unless
<ocrtm> parameter is NULL, then this parameter does not apply.
<ocrtm>
This is the time when the triggering event occurred. The format for this parameter is
HOD-MOH-SOM (Hour-Of-Day - Minute-Of-Hour - Second-Of-Minute). HOD ranges from
0 to 23. MOH and SOM range from 0 to 59. A NULL value means this parameter and
the <ocrdat> parameter are not applicable.
<almmsg>
This parameter is not supported in LMS1000.
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Chapter 3. Commands
Section 5847
Issue AL, July 24, 2006
Page 3-341