Set Lps System Usecelsius - Emerson LMS1000 User Instructions

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)

SET LPS SYSTEM USECELSIUS

Description: Sets the LPS temperature readings to Celsius.
Command Level: 6
Syntax: SET LPS SYSTEM USECELSIUS
Comments: none
Notes: none
Related Commands: none
Example:
Command<6>: set lps sys usec
Change MCA to use Celsius? (Y or N): y
Change ACCEPTED!
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SE LP SY USEC
Chapter 3. Commands
Section 5847
Issue AL, July 24, 2006
Page 3-211