Ip Networking Commands - Emerson LMS1000 User Instructions

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)

IP Networking Commands

This section provides an alphabetical list of all IP Networking commands available when
the SNMP software option is installed, with a short description of each command.
IP Networking Commands
IP
IP ADD <address>
IP ADDRESS <address>
IP DELETE <address>
IP GATEWAY <address>
IP NETMASK <address>
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
display the IP Network variables
add a new host to the list of authorized hosts
set the units IP address
remove a host from the list of authorized hosts
set the units gateway address
set the units network netmask
Chapter 3. Commands
Issue AL, July 24, 2006
Description
Section 5847
Page 3-15