Chapter 1 Introduction; Table Of Contents; Preface; What Is Lms1000 - Emerson LMS1000 User Instructions

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
CHAPTER 1
INTRODUCTION

TABLE OF CONTENTS

Preface ............................................................................................................................ 1-1

What is LMS1000 ............................................................................................................ 1-1

LMS1000 Consists Of...................................................................................................... 1-2
LMS1000 Provides ... ...................................................................................................... 1-3
PREFACE
This document (Section 5847) provides User Instructions for Monitoring System Model
LMS1000, Spec. Nos. 586505000 and 586505500. These instructions also provide
procedures for the integrated LMS of a Spec. No. 582140000 LPS Power System.
For Installation Instructions, refer to Section 5879 located in the separate INSTALLATION
MANUAL. Installation instructions are also provided on the CD (Electronic
Documentation Package) furnished with your system.
WHAT IS LMS1000
•
•
•
•
•
•
•
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
LMS1000 is a programmable monitoring, controlling, and data acquisition system
designed for use in telecommunications power sites.
LMS1000 can be equipped to monitor analog, binary, and temperature inputs.
LMS1000 collects data on the monitored inputs. The data collected is used for alarm
processing and reporting, and to provide statistics.
LMS1000 is capable of reporting alarm conditions to a remote terminal, pager, or
Email address. For remote terminal or pager notification, LMS1000 must be
equipped with an optional modem. Two types of alarm reporting mechanisms are
provided, System Alarm Reporting and Individual User Alarm Reporting.
LMS1000 is capable of reporting alarm conditions via SNMP traps over Ethernet
when the SNMP option is ordered, or via TL1 (over Ethernet) when the 'TL1 over
Ethernet' option is ordered. TL1 is also available via a serial connection in 'direct
mode'.
LMS1000 provides programmable LED's to allow local indication of alarm conditions
or occurrences. For remote indication, LMS1000 can be equipped with
programmable relays. Relays can also be used to control other equipment.
LMS1000 easily interfaces with the MCA of a Vortex
Power System. This interface allows an LMS1000 user to remotely monitor, adjust,
and control the VPS or LPS via LMS1000, plus easily use the features of LMS1000
Chapter 1. Introduction
Section 5847
Issue AL, July 24, 2006
®
Power System (VPS) or LPS
Page 1-1