Emerson LMS1000 User Instructions page 321

User Instructions
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
SET VI
Description: Sets the channels that the Web Interface uses to display system voltage
and system current.
Command Level: 6
Syntax: SET VI
Comments: One at a time, the current setting is displayed and then a line to change the
setting. Simply press enter to keep the current setting.
Notes: If LMS1000 is connected to a LPS Power System (VPS), you can enter A9001 as
the Plant Voltage channel and A9002 as the Plant Load channel.
Related Commands: none
Example:
Command<1>: SET VI
Plant Voltage:
Plant Voltage: A9001
Plant Current:
Plant Current: A9002
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SE VI
Chapter 3. Commands
Section 5847
Issue AL, July 24, 2006
Page 3-239