Traps On - Emerson LMS1000 User Instructions

Section 5847
Issue AL, July 24, 2006

TRAPS ON

Description: Enable the system to send SNMP TRAPS.
Command Level: 6
Syntax: TRAPS ON
Comments: This enables the system to generate a TRAP when required. If traps are
enabled, all traps are sent to the configured hosts.
Notes: none
Related Commands: TRAPS
Example:
Command<6> : TRAPS ON
Page 3-308
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
TRAPS ADD
TRAPS DELETE
TRAPS OFF
TRAPS VERSION
Chapter 3. Commands
User Instructions