Limits - Emerson LMS1000 User Instructions

Section 5847
Issue AL, July 24, 2006

LIMITS

Description: Displays the alarm limits for each analog and function input.
Command Level: 2
Syntax: LIMITS[node_designator] [channel_range] [node_range]
Comments: Typing a command like PRCONFIG A1 will list the entire channel
configuration for analog channel 1 including the limits.
Notes: When using channel_range, only channel types A or F are valid. Except for LPS
distribution points, LPS analog channels cannot be configured to alarm because those
limits are controlled by the MCA and result in binary alarms in the LMS.
Related Commands: none
Example:
Command<2>: LIMITS A
ANALOG CHANNEL ALARM LIMITS AS OF 07:36:02 ON 01/01/01.
Chan Description
A0001 Analog Channel 1
Limit / Name
70.0 H HVA2
Condition Description
THIS VOLTAGE IS TOO HIGH
60.0 H HVA1
Condition Description
THIS VOLTAGE IS HIGH
50.0 L LVA1
Condition Description
THIS VOLTAGE IS LOW
40.0 L LVA2
Condition Description
THIS VOLTAGE IS TOO LOW
A0002 Analog Channel 2
Limit / Name
7000 H ABOVE 7000 MAJOR
Condition Description
THIS CURRENT IS ABOVE 7000 AMPS
6000 H ABOVE 6000 MAJOR
Condition Description
THIS CURRENT IS ABOVE 6000 AMPS
500 L BELOW 500
Condition Description
THIS CURRENT IS BELOW 500 AMPS
100 L BELOW 100
Condition Description
THIS CURRENT IS BELOW 100 AMPS
Page 3-94
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
LIMITS A[[node_number] channel_number]
LIMITS F[channel_number]
LIM[node_designator] [channel_range] [node_range]
LIM A[[node_number] channel_number]
LIM F[channel_number]
Class Condtype
MAJOR TOOHIGH
MAJOR HIGH
MINOR LOW
MINOR TOOLOW
Class Condtype
TOOHIGH
HIGH
MINOR LOW
MINOR TOOLOW
Chapter 3. Commands
Ntfc Svef
MJ SA
MJ SA
MN NSA
MN NSA
Ntfc Svef
MJ SA
MJ SA
MN NSA
MN NSA
User Instructions