Operation Of The Unit; Digital Operator - KEB COMBIVERT F5 Instruction Manual

4. Operation of the unit
4.1 Digital Operator

Interface control
Transmit "LED on"
HSP5 diagnostic port
5 4 3 2 1
9 8 7 6
X6C
RS232, RS485
50
The Elevator drive uses a special operator which provides a user interface
and functionality specific to elevator applications. The operator must be
plugged into the drive in order for the drive to function correctly.
Unplugging the operator while the drive is in operation will result
in immediate shutdown of the drive and will cause the ready relay
to drop and the fault output to activate. If it is necessary to remove
the operator, do so while the elevator is standing still!
Elevator Operator: Part No. 00.F5.060-202
RS232, RS485
Use only the operator interface X6C for the serial data transfer using
RS232, or 485. The direct connection from PC directly to the Elevator
Drive without operator or using the HSP5 diagnostic port is only possible
with a special cable. Incorrect cabling can lead to the destruction of the
PC-interface. Consult the factory for more information.
PIN RS485 Signal
1 – –
2 – TxD
3 – RxD
4 A' RxD-A
5 B' RxD-B
6 – VP
7 C, C' DGND
8 A TxD-A
 B TxD-B
5-digit LED Display
Operating-Error display
Normal "LED on"
Error "LED blinks"
Double function keypad
Meaning
reserved
Transmitter signal, RS232
Receiver signal, RS232
Receiver signal A, RS485
Receiver signal B, RS485
Voltage supply-Plus +5V (I
Data reference potential
Transmitter signal A, RS485
Transmitter signal B, RS485
= 10 mA)
max