KEB COMBIVERT F5 Instruction Manual page 119

�����
�����
���
����
change between
parameter group
�����
and parameter
���
offset number
Diagnostic Parameters
change between
parameter group
and parameter
number
�����
���
�����
�����
�����
�����
���
����
����
�����
�����
�����
���
����
Clearing the fault history
The fault history can be cleared with the following steps:
Set the display to 0.LF.98
Press Func.
Press the up arrow and the display will change to a number.
Press up or down to scroll to the value 10.
Press enter and the history will be cleared. The message noP will be
loaded into all 8 fault histories.
�����
�����
���
����
�����
���
�����
�����
With the up, down keys
select the respective
parameter offset number
0,1,2,3...7
�����
�����
�����
�����
change between
parameter number
and parameter
offset number
11