Advanced Parameters
US. 25
This parameter can be used to select what type of current check is performed.
Additionally it determines whether or not the brake on/off message is displayed. In the
Phase current
event there is a problem getting a consistently positive phase check, it is possible to
check
switch to only a magnetizing current check. The possibilities are defined below.
136
Value
Function
0
Off (for temporary adjustment only)
1
Magnetization current check with brake on/off display
2
Magnetization current check without brake on/off display
3
Phase current check with brake on/off display
(default)
4
Phase current check without brake on/off display