KEB COMBIVERT F5 Instruction Manual
Encoder interface
Hide thumbs
Also See for COMBIVERT F5:
- Applications manual (378 pages) ,
- Reference manual (349 pages) ,
- Instruction manual (196 pages)
Related Manuals for KEB COMBIVERT F5
Summary of Contents for KEB COMBIVERT F5
- Page 1 COMBIVERT INSTRUCTION MANUAL Encoder interface Channel 1 variable Channel 2 Analog Input ±10 V Mat.No. Rev. DVF5ZEM-K000...
-
Page 3: Table Of Contents
Table of Contents 1. Safety Instructions ..................4 Validity ........................4 1.2 Qualification ......................4 2. Product Description ..................5 General .......................5 Material number ....................5 Scope of delivery (option or replacement delivery) ..........5 Mechanical installation ..................6 3. Description of the Interface ................6 Voltage supply ....................6 Channel 1 ......................6 Channel 2 ......................7... -
Page 4: Safety Instructions
The used semiconductors and components of KEB are developed and dimensio- ned for the use in industrial products. If the KEB COMBIVERT is used in machi- Use under spe-... -
Page 5: Product Description
Analog Input ±10 V variable General Each of the interface cards delivered by KEB include two interfaces. As there are numerous different combinations available each interface will be described by means of separate in- structions. The instruction comprises the installation of the interface card, the connection as well as the start-up of a suitable encoder. Further information and the parameter adjust- ments are described in the application manual for the inverter/servo. -
Page 6: Mechanical Installation
With the default trimming an accuracy of 2 % is reached with the installation of the analog card. A trimming between control card and option is required for a higher accuracy. An instruction for this is available in the Infobak under www. keb.de in section "Downloads". Description of the Interface Voltage supply Figure 3.1... -
Page 7: Specifications
Analog Input ±10V at Channel 2 Channel 2 3.3.1 Specifications Terminal strip 4-pole Interface type Analog input Input voltage ±10 Vdc Input resistance 60 kΩ Scan time 1 ms 3.3.2 Description of X3B Figure 3.3.2 Socket X3B Attention ! Plug connector only when COMBIVERT and supply voltage are switched off ! Name... -
Page 8: Parameter Adjustments For Speed-/Frequency Setting
Analog Input ±10V at Channel 2 4.1.2 Parameter adjustments for speed-/frequency setting Display parameter Parameter Description ru.31 AN3 pre amplifier display Percentage display of the input value of the analog option ru.32 AN3 post amplifier display Percentage display of the analog channel after amplification and limitation Parameters for the adjustment of the analog channel Parameter Description An.20... -
Page 9: Further Adjustments
Analog Input ±10V at Channel 2 4.1.3 Further adjustments Further adjustments and application possibilities can be taken from the appropriate appli- cation manual. GB -9... - Page 10 Notes GB - 10...
- Page 12 +39 02 33535311 • fax: +39 02 33500790 net: www.keb.it • mail: kebitalia@keb.it KEB Power Transmission Technology (Shanghai) Co.,Ltd. No. 435 QianPu Road, Songjiang East Industrial Zone, KEB Japan Ltd. CHN-201611 Shanghai, P.R. China 15–16, 2–Chome, Takanawa Minato-ku fon: +86 21 37746688 • fax: +86 21 37746600 J–Tokyo 108-0074...
Need help?
Do you have a question about the COMBIVERT F5 and is the answer not in the manual?
Questions and answers