Saving Parameter Values; Error Messages - KEB COMBIVERT F5 Instruction Manual

di-Parameter: di.0 ... di.3
The di parameters are comprised of parameters for defining the input functions
4.6 Saving Parameter Values
4.7 Error Messages
Keypad Display
If the parameter value is changed, a point appears behind the last
position in the display. The adjusted parameter value is permanently
saved when ENTER is pressed. The point after the value disappears
to confirm.
Example:
If a malfunction occurs during operation, the drive shuts down
operation and the actual display is overwritten with the error
message. By pressing the "ENTER" key, the error message and the
fault status is cleared. Exception: E.ENCC errors, see parameter
LF.26 for E.ENCC errors.
Example:
Error / Mal-
function
i
Some errors are automatically reset according
to the adjustment of parameter LF.5. So it is
possible that the error message and the error
status of the drive will clear on its own. Refer to
parameter LF.98 for the fault history.
(running/error message) see p. 120
ENTER
F/R
SAVE
ENTER
F/R
Inverter Status Message
53