Table 118. Fault Codes - Eaton PowerXL DG1 Series VFD Communications Manual

Table 117. Field Coding, continued
Field Data Type
Format Unsigned 8
No. of Values Unsigned 8
Error Number Unsigned 16
Fault Code Tracking

Table 118. Fault Codes

Fault
SN Code Fault
1 26 Device Change
2 27 Device Added
3 28 Device Removed
4 29 Device Unknown
5 35 Comm Bus Fault
6 56 OPT Card Fault
Generic Station Description (GSD) File
Please refer GSD file "019D0CFF.gsd"
Values
0x00 Reserved
0x01...0x36 Data types
0x37...0x3F Reserved
0x40 Zero
0x41 Byte
0x42 Word
0x43 Double word
0x44 Error
0x45...0xFF Reserved
0x00...0xEA Quantity 0–234
0xEB...0xFF Reserved
0x0000... Error Numbers
0x00FF
Possible Cause
Option Board Changed
Option Board Added
Option Board Removed
Unknown Option Board
The data connection between the PROFIBUS
master and
Device option board or slot. The PROFIBUS
option board is broken.
PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com
PROFIBUS-DP External Communication Cards
Comment
Every slave shall at least support the data types Byte,
Word and Double Word (mandatory). Write requests
by the master preferable use the "correct" data types.
As substitute, Byte, Word, or Double Word are also
possible. The master shall be able to interpret all
values/data types.
Limitation because of 240 Bytes Data block size
(compatible with former PROFIdrive version 3.1.2).
The more significant byte is reserved.
Correction measures
Reset
Reset
Check the installation is correct.
Check the board and slot.
95