PROFIBUS-DP External Communication Cards
Commissioning
The PROFIBUS board is commissioned by inserting it to the Slot A or Slot B. Once
the card is inserted to the slot, the device will recognize it and will show a warning
for "Device Added". This warning will be shown for 5 seconds and will go away.
Once the card is detected, the keypad will show the menu for this card in Optional
Card Menu.
Optional Comm Cards Parameters
Once the card is detected, following parameters can be set on keypad for the PROFIBUS.
Figure 38. PROFIBUS Parameter Menu
PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com
83