Figure 42. Plc Configuration - Eaton PowerXL DG1 Series VFD Communications Manual

PROFIBUS-DP External Communication Cards
PowerXL PROFIdrive Interface
PowerXL has PROFIdrive profile 4.1, which allows—
Direct control of the drive using PROFIBUS Master
●
Full access to all drive parameters
●
General
Data transfer between PROFIBUS DP master and slave
takes place via the input/output data field. The master writes
to slave's output data and the slave answers by sending the
contents of its inputs data to master. The content of the
input/output data is defined in the device profile. The device
profile for drives is PROFIdrive.
PowerXL drive can be controlled by PROFIBUS DP master
using ST1 telegram of the PROFIdrive profile.
Siemens Configuration
PLC Configuration Instructions Document
Siemens PLC Setup

Figure 42. PLC Configuration

96 PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com