Modbus TCP On-Board Communications
Manual IP Address Configuration
Using the PowerXL Drive Keypad
Using the PowerXL Drive Keypad to set the IP Address
manually in the PowerXL EtherNet/IP.
1.
Select IP addressing mode as Default static IP
configurations will be loaded.
Figure 14. Static IP Mode
20
PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com
Note: Change in IP address mode will require PowerXL
to power cycle to get this change effective. Also ensure
device MAC address (Keypad menu. P20.3.5)