Gvrp Configuration Task List - Planet Networking & Communication WGSW-50040 Configuration Manual

10.2.2 GVRP Configuration Task List

1. Configuring GARP Timer parameters
Port Mode
garp timer join <timer-value>
no garp timer join
garp timer leave <timer-value>
no garp timer leave
garp timer hold <timer-value>
no garp timer hold
Global Mode
garp timer leaveall <timer-value>
no garp timer leaveall
2. Enable GVRP function
Port Mode
gvrp
no gvrp
Global Mode
gvrp
no gvrp
Command
Command
10-6
Explanation
Configure the hold, join and
leave timers for GARP.
Configure the leave all timer for
GARP.
Explanation
Enable/disable the GVRP
function on current port.
Enable/disable the GVRP
function for the switch.