Planet Networking & Communication WGSW-50040 Configuration Manual page 102

11.5.1.2 MAC Address Binding Configuration Task List
1. Enable MAC address binding function for the ports
2. Lock the MAC addresses for a port
3. MAC address binding property configuration
1. Enable MAC address binding function for the ports
Port Mode
switchport port-security
no switchport port-security
2. Lock the MAC addresses for a port
Port Mode
switchport port-security lock
no switchport port-security lock
switchport port-security convert
switchport port-security timeout <value>
no switchport port-security timeout
switchport port-security mac-address
<mac-address>
no switchport port-security
mac-address <mac-address>
Admin Mode
clear port-security dynamic [address
<mac-addr> | interface <interface-id>]
Command
Command
Explanation
Enable MAC address binding function for
the port and lock the port. When a port is
locked, the MAC address learning function
for the port will be disabled: the "no
switchport port-security" command
disables the MAC address binding function
for the port, and restores the MAC address
learning function for the port.
Explanation
Lock the port, then MAC addresses
learned will be disabled. The "no
switchport port-security lock" command
restores the function.
Convert dynamic secure MAC addresses
learned by the port to static secure MAC
addresses.
Enable port locking timer function; the "no
switchport port-security timeout"
restores the default setting.
Add static secure MAC address; the "no
switchport port-security mac-address"
command deletes static secure MAC
address.
Clear dynamic MAC addresses learned by
the specified port.
11-6