Planet Networking & Communication WGSW-50040 Configuration Manual page 188

Time range Mode
absolute-periodic {Monday | Tuesday | Wednesday |
Thursday | Friday | Saturday | Sunday} <start_time> to
{Monday | Tuesday | Wednesday | Thursday | Friday |
Saturday | Sunday} <end_time>
periodic {{Monday+Tuesday+Wednesday+Thursday+
Friday+Saturday+Sunday} | daily | weekdays |
weekend} <start_time> to <end_time>
[no] absolute-periodic {Monday | Tuesday |
Wednesday | Thursday | Friday | Saturday | Sunday}
<start_time> to {Monday | Tuesday | Wednesday |
Thursday | Friday | Saturday | Sunday} <end_time>
[no] periodic
{{Monday+Tuesday+Wednesday+Thursday+
Friday+Saturday+Sunday} | daily | weekdays |
weekend} <start_time> to <end_time>
（3）Configure absolute time range
Global Mode
absolute start <start_time> <start_data> [end
<end_time> <end_data>]
[no] absolute start <start_time> <start_data> [end
<end_time> <end_data>]
4. Bind access-list to a specific direction of the specified port.
Physical Port Mode, VLAN Port Mode
{ip|ipv6|mac|mac-ip} access-group <acl-name>
{in}[traffic-statistic]
no {ip|ipv6|mac|mac-ip} access-group <acl-name>
{in}
Command
Command
24-17
Configure the time range for
the request of the week, and
every week will run by the
time range.
Stop the function of the time
range in the week.
Explanation
Configure absolute
range.
Stop the function of the time
range.
Explanation
Physical interface
Applies an access-list to the
specified direction on the
port; the no command
deletes the access-list
bound to the port.
VLAN interface
Applies an access-list to the
specified direction on the
time
mode:
mode: