Typical Configuration Examples - Planet Networking & Communication WGSW-50040 Configuration Manual

1. Configure the MAC aging-time
Global Mode
mac-address-table aging-time
<0|aging-time>
no mac-address-table aging-time
2. Configure static MAC forwarding or filter entry
Global Mode
mac-address-table {static | blackhole}
address <mac-addr> vlan <vlan-id >
[interface [ethernet | portchannel]
<interface-name>] |
[source|destination|both]
no mac-address-table {static | blackhole |
dynamic} [address <mac-addr>] [vlan
<vlan-id>] [interface [ethernet |
portchannel] <interface-name>]

11.3 Typical Configuration Examples

PC1
MAC 00-01-11-11-11-11
Scenario:
Four PCs as shown in the above figure connect to port 1/5、1/7、1/9、1/11 of switch, all the four PCs belong
Command
Command
1/5 1/7
PC2
MAC 00-01-22-22-22-22
Figure 11-2 MAC Table typical configuration example
Explanation
Configure the MAC address aging-time.
Explanation
Configure static MAC forwarding or filter
entry.
1/11
1/9
PC3
MAC 00-01-33-33-33-33
MAC 00-01-44-44-44-44
11-4
PC4