Planet Networking & Communication WGSW-50040 Configuration Manual page 57

ftp-dir <ftpServerUrl>
2. FTP server configuration
（1）Start FTP server
Command
Global Mode
ftp-server enable
no ftp-server enable
（2）Configure FTP login username and password
Command
Global Mode
ip ftp username <username>
{nopassword | password {0 | 7}
<password>}
no ip ftp username<username>
（3）Modify FTP server connection idle time
Command
Global Mode
ftp-server timeout <seconds>
3. TFTP server configuration
（1）Start TFTP server
Command
Global Mode
tftp-server enable
no tftp-server enable
（2）Modify TFTP server connection idle time
Command
For FTP client, server file list can be
checked. FtpServerUrl format looks like: ftp:
//user: password@IPv4|IPv6 Address.
Explanation
Start FTP server and support IPv4, IPv6, the no
command shuts down FTP server and prevents
FTP user from logging in.
Explanation
Configure FTP login username and password;
this no command will delete the username and
password.
Explanation
Set connection idle time.
Explanation
Start TFTP server, the no command shuts down
TFTP server and prevents TFTP user from
logging in.
Explanation
4-19