Typical Application Of The Dynamic Vlan - Planet Networking & Communication WGSW-50040 Configuration Manual

10.4.3 Typical Application of the Dynamic VLAN

Scenario:
In the office network Department A belongs to VLAN100. Several members of this department often have the
need to move within the whole office network. It is also required to ensure the resource for other members of
the department to access VLAN 100. Assume one of the members is M, the MAC address of his PC is
00-30-4f-11-22-33, and similar configurations are assigned to other members.
SwitchA SwitchB SwitchC
VLAN100
VLAN200
VLAN300
M
Figure 10-5 Typical topology application of dynamic VLAN
Configuration Items Configuration Explanation
MAC-based VLAN Global configuration on Switch A, Switch B, Switch C.
For example, M at E1/1 of SwitchA, then the configuration procedures are as follows:
Switch A, Switch B, Switch C:
switch(Config)#mac-vlan mac 00-30-4f-11-22-33 vlan 100 priority 0
switch(Config)#exit
switch#
10-14