Voice Vlan Troubleshooting - Planet Networking & Communication WGSW-50040 Configuration Manual

Configuration items
Voice VLAN
Configuration procedure:
Switch 1:
Switch(config)#vlan 100
Switch(Config-Vlan100)#exit
Switch(config)#voice-vlan vlan 100
Switch(config)#voice-vlan mac 00-30-4f-11-22-33 mask 255 priority 5 name company
Switch(config)#voice-vlan mac 00-30-4f-11-22-55 mask 255 priority 5 name company
Switch(config)#interface ethernet 1/10
Switch(Config-If-Ethernet1/10)#switchport mode trunk
Switch(Config-If-Ethernet1/10)#exit

10.5.4 Voice VLAN Troubleshooting

 Voice VLAN can not be applied concurrently with MAC-base VLAN
 The Voice VLAN support maximum 1024 sets of voice equipments, the exceeded number of
equipments will not be supported
 The Voice VLAN on the port is enabled by default. If the configured data can no longer enter the Voice
VLAN during operation, please check if the Voice VLAN function has been disabled on the port.
IP-phone1 IP-phone2
Figure 10-7 VLAN typical apply topology
Configuration Explanation
Global configuration on the Switch.
10-17
Switch