Planet Networking & Communication WGSW-50040 Configuration Manual page 134

anti-arpscan enable
no anti-arpscan enable
2. Configure the threshold of the port-based and IP-based ARP Scanning Prevention
Global configuration mode
anti-arpscan port-based threshold
<threshold-value>
no anti-arpscan port-based
threshold
anti-arpscan ip-based threshold
<threshold-value>
no anti-arpscan ip-based threshold
3. Configure trusted ports
Port configuration mode
anti-arpscan trust <port |
supertrust-port>
no anti-arpscan trust <port |
supertrust-port>
4. Configure trusted IP
Global configuration mode
anti-arpscan trust ip <ip-address>
[<netmask>]
no anti-arpscan trust ip <ip-address>
[<netmask>]
5. Configure automatic recovery time
Global configuration mode
anti-arpscan recovery enable
no anti-arpscan recovery enable
anti-arpscan recovery time <seconds>
no anti-arpscan recovery time
6. Display relative information of debug information and ARP scanning
Global configuration mode
Command
Command
Command
Command
Command
Enable or disable the ARP Scanning
Prevention function globally.
Explanation
Set the threshold of the port-based
ARP Scanning Prevention.
Set the threshold of the IP-based ARP
Scanning Prevention.
Explanation
Set the trust attributes of the ports.
Explanation
Set the trust attributes of IP.
Explanation
Enable or disable
recovery function.
Set automatic recovery time.
Explanation
16-2
the automatic