Planet Networking & Communication WGSW-50040 Configuration Manual page 187

[no] {deny | permit} {{<sIPv6Prefix/sPrefixlen>} |
any-source | {host-source <sIPv6Addr> }}
c. Exit name-based standard IP ACL configuration mode
Standard IPV6 ACL Mode
exit
2. Configuring packet filtering function
(1) Enable global packet filtering function
Global Mode
firewall enable
firewall disable
(2) Configure default action.
Global Mode
firewall default {permit |deny}
3. Configuring time range function
（1）Create the name of the time range
Global Mode
time-range <time_range_name>
no time-range <time_range_name>
（2）Configure periodic time range
Command
Command
Command
Command
Command
24-16
Creates a standard
name-based IPV6 access
rule; the no form command
deletes the name-based
standard IPV6 access rule.
Explanation
Exits name-based standard
IPV6 ACL configuration
mode.
Explanation
Enables global
filtering function.
Disables global
filtering function.
Explanation
Sets default action
firewall.
Explanation
Create a time range named
time_range_name.
Stop the time range function
named time_range_name.
Explanation
packet
packet
to