Planet Networking & Communication WGSW-50040 Configuration Manual page 92

5. Configure the correspondence between the IP subnet and the VLAN
Global Mode
subnet-vlan ip-address <ipv4-addrss>
mask <subnet-mask> vlan <vlan-id>
priority <priority-id>
no subnet-vlan {ip-address <ipv4-addrss>
mask <subnet-mask>|all}
6. Configure the correspondence between the Protocols and the VLAN
Global Mode
protocol-vlan mode {ethernetii etype
<etype-id>|llc {dsap <dsap-id> ssap
<ssap-id>}|snap etype <etype-id>} vlan
<vlan-id> priority <priority-id>
no protocol-vlan {mode {ethernetii etype
<etype-id>|llc {dsap <dsap-id> ssap
<ssap-id>}|snap etype <etype-id>}|all}
7. Adjust the priority of the dynamic VLAN
Global Mode
dynamic-vlan mac-vlan prefer
dynamic-vlan subnet-vlan prefer
Command
Command
Command
Explanation
Add/delete the correspondence between
the IP subnet and the VLAN, namely
specified IP subnet joins/leaves specified
VLAN.
Explanation
Add/delete the correspondence between
the Protocols and the VLAN, namely
specified protocol joins/leaves specified
VLAN.
Explanation
Configure the priority of the dynamic
VLAN.
10-13