Arp Scanning Prevention Troubleshooting Help - Planet Networking & Communication WGSW-50040 Configuration Manual

SWITCHB configuration task sequence:
Switch B(config)# anti-arpscan enable
SwitchB(config)#interface ethernet1/1
SwitchB (Config-If-Ethernet 1/1)#anti-arpscan trust port
SwitchB (Config-If-Ethernet 1/1)exit

16.4 ARP Scanning Prevention Troubleshooting Help

 ARP scanning prevention is disabled by default. After enabling ARP scanning prevention, users can
enable the debug switch, "debug anti-arpscan", to view debug information.
16-4