Planet Networking & Communication WGSW-50040 Configuration Manual page 222

am port
no am port
3. Configure the forwarding IP
Port Mode
am ip-pool <ip-address> <num>
no am ip-pool <ip-address> <num>
4. Configure the forwarding MAC-IP
Port Mode
am mac-ip-pool <mac-address>
<ip-address>
no am mac-ip-pool <mac-address>
<ip-address>
5. Delete all of the configured IP or MAC-IP or both
Global Mode
no am all [ip-pool|mac-ip-pool]
6. Display relative configuration information of AM
Global Configuration Mode
show am [interface <interface-name>]
Command
Command
Command
Command
Enable/disable AM function on the port.
When the AM function is enabled on the
port, no IP or ARP message will be
forwarded by default.
Explanation
Configure the forwarding IP of the port.
Explanation
Configure the forwarding MAC-IP of the
port.
Explanation
Delete MAC-IP address pool or IP
address pool or both pools configured by
all users.
Explanation
Display the AM configuration information
of one port or all ports.
27-2