Planet Networking & Communication WGSW-50040 Configuration Manual page 108

4. Configure MSTP time parameters
Global Mode
spanning-tree forward-time <time>
no spanning-tree forward-time
spanning-tree hello-time <time>
no spanning-tree hello-time
spanning-tree maxage <time>
no spanning-tree maxage
spanning-tree max-hop <hop-count>
no spanning-tree max-hop
5. Configure the fast migrate feature for MSTP
Port Mode
spanning-tree link-type p2p
{auto|force-true|force-false}
no spanning-tree link-type
spanning-tree portfast [bpdufilter|
bpduguard]
no spanning-tree portfast
6. Configure the format of MSTP
Port Mode
spanning-tree format standard
spanning-tree format privacy
spanning-tree format auto
no spanning-tree format
7. Configure the snooping attribute of authentication key
Port Mode
spanning-tree digest-snooping
no spanning-tree digest-snooping
Command
Command
Command
Command
Explanation
Set the value for switch forward delay
time.
Set the Hello time for sending BPDU
messages.
Set Aging time for BPDU messages.
Set Maximum number of hops of
BPDU messages in the MSTP region.
Explanation
Set the port link type.
Set and cancel the port to be an
boundary port. bpdufilter receives the
BPDU discarding; bpduguard receives
the BPDU will disable port; no parameter
receives the BPDU, the port becomes a
non-boundary port.
Explanation
Configure the
spanning-tree packet，standard format
is provided by IEEE,
compatible with CISCO and auto
means the format is determined by
checking the received packet.
Explanation
Set the port to use the authentication
string of partner port. The no restores
to use the generated string.
12-5
format of port
privacy is