Planet Networking & Communication WGSW-50040 Configuration Manual page 208

dot1x web authentication
enable
no dot1x web authentication
enable
dot1x web redirect <URL>
no dot1x web redirect
3. Access management unit property configuration
1) Configure port authentication status
Command
Port Mode
dot1x port-control
{auto|force-authorized|force-
unauthorized }
no dot1x port-control
2) Configure port access management method
Command
Port Mode
dot1x port-method
{macbased | portbased
|webbased|userbased
advanced}
no dot1x port-method
dot1x max-user macbased
<number>
no dot1x max-user
macbased
dot1x max-user userbased
<number>
no dot1x max-user
userbased
dot1x guest-vlan <vlanID>
no dot1x guest-vlan
3) Configure expanded 802.1x function
Command
Global Mode
dot1x macfilter enable
no dot1x macfilter enable
Enable Web authentication agent, the no command
disable Web authentication agent.
Set the HTTP server address for Web redirection, the no
command clears the address.
Sets the 802.1x authentication mode; the no command
restores the default setting.
Sets the port access management method; the no
command restores MAC-based access management.
Sets the maximum number of access users for the
specified port; the no command restores the default setting
of allowing 1 user.
Set the upper limit of the number of users allowed
accessing the specified port, only used when the access
control mode of the port is userbased; the no command is
used to reset the limit to 10 by default.
Set the guest vlan of the specified port; the no command is
used to delete the guest vlan.
Enables the 802.1x address filter function in the switch; the
no command disables the 802.1x address filter function.
25-14
Explanation
Explanation
Explanation