Planet Networking & Communication WGSW-50040 Configuration Manual page 168

ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan
<vlan-id>
ipv6 mld snooping vlan <vlan-id>
limit {group <g_limit> | source
<s_limit>}
no ipv6 mld snooping vlan
<vlan-id> limit
ipv6 mld snooping vlan <vlan-id>
l2-general-querier
no ipv6 mld snooping vlan
<vlan-id> l2-general-querier
ipv6 mld snooping vlan <vlan-id>
mrouter-port interface <interface
–name>
no ipv6 mld snooping vlan
<vlan-id> mrouter-port interface
<interface –name>
ipv6 mld snooping vlan <vlan-id>
mrpt <value>
no ipv6 mld snooping vlan
<vlan-id> mrpt
ipv6 mld snooping vlan <vlan-id>
query-interval <value>
no ipv6 mld snooping vlan
<vlan-id> query-interval
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no ipv6 mld snooping vlan
<vlan-id> immediate-leave
ipv6 mld snooping vlan <vlan-id>
query-mrsp <value>
no ipv6 mld snooping vlan
<vlan-id> query-mrsp
ipv6 mld snooping vlan <vlan-id>
query-robustness <value>
no ipv6 mld snooping vlan
<vlan-id> query-robustness
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no ipv6 mld snooping vlan
<vlan-id> suppression-query-time
Ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source
Enable MLD Snooping on specific VLAN. The "no"
form of this command disables MLD Snooping on
specific VLAN.
Configure the number of the groups in which the MLD
Snooping can join, and the maximum number of
sources in each group. The "no" form of this command
restores to the default.
Set the VLAN level 2 general querier, which is
recommended on each segment. The "no" form of this
command cancels the level 2 general querier
configuration.
Configure the static mrouter port in specific vlan. The
"no" form of this command cancels the mrouter port
configuration.
Configure the keep-alive time of the mrouter port. The
"no" form of this command restores to the default.
Configure the query interval. The "no" form of this
command restores to the default.
Configure immediate leave multicast group function for
the MLD Snooping of specific VLAN. The "no" form of
this command cancels
configuration.
Configure the query maximum response period. The
"no" form of this command restores to the default.
Configure the query robustness, the "no" form of this
command restores to the default.
Configure the suppression query time. The "no" form
of this command restores to the default
Configure static-group on specified port of the VLAN.
The no form of
22-2
the immediate
the command cancels
leave
this