Planet Networking & Communication WGSW-50040 Configuration Manual page 107

2. Configure instance parameters
Global Mode
spanning-tree mst <instance-id> priority
<bridge-priority>
no spanning-tree mst <instance-id>
priority
spanning-tree priority <bridge-priority>
no spanning-tree priority
Port Mode
spanning-tree mst <instance-id> cost
<cost>
no spanning-tree mst <instance-id> cost
spanning-tree mst <instance-id>
port-priority <port-priority>
no spanning-tree mst <instance-id>
port-priority
spanning-tree mst <instance-id>
rootguard
no spanning-tree mst <instance-id>
rootguard
spanning-tree rootguard
no spanning-tree rootguard
3. Configure MSTP region parameters
Global Mode
spanning-tree mst configuration
no spanning-tree mst configuration
MSTP region mode
instance <instance-id> vlan <vlan-list>
no instance <instance-id> [vlan <vlan-list>]
name <name>
no name
revision-level <level>
no revision-level
abort
exit
Command
Command
Explanation
Set bridge priority for specified instance.
Configure the spanning-tree priority of the
switch.
Set port path cost for specified instance.
Set port priority for specified instance.
Configure currently port whether running
rootguard in specified instance, configure
the rootguard port can't turn to root port.
Configure currently port whether running
rootguard in instance 0, configure the
rootguard port can't turn to root port.
Explanation
Enter MSTP region mode. The no
command restores the default setting.
Create Instance and set mapping
between VLAN and Instance.
Set MSTP region name.
Set MSTP region revision level.
Quit MSTP region mode and return to
Global mode without saving MSTP
region configuration.
Quit MSTP region mode and return to
Global mode with saving MSTP region
configuration.
12-4