The Number Limitation Function Of Port , Mac In Vlan Typical Examples; The Number Limitation Function Of Port , Mac In Vlan Troubleshooting Help - Planet Networking & Communication WGSW-50040 Configuration Manual

26.3 The Number Limitation Function of Port, MAC in VLAN
Typical Examples
26-1 The Number Limitation of Port, MAC in VLAN Typical Configuration Example
Figure
In the network topology above, SWITCH B connects to many PC users, before enabling the number limitation
function of port, MAC in VLAN, if the system hardware has no other limitation, SWTICH A and SWTICH B can
get the MAC list entries of all the PC, so limiting the MAC list entry can avoid DOS attack to a certain extent.
When malicious users frequently do MAC cheating, it will be easy for them to fill the MAC list entries of the
switch, causing successful DOS attacks. Limiting the MAC list entry can prevent DOS attack.
On port 1/1 of SWITCH A, set the max number can be learnt of dynamic MAC address as 20. In VLAN 1, set
the max number of dynamic MAC address as 30.
SWITCH A configuration task sequence:
Switch (config)#interface ethernet 1/1
Switch (Config-If-Ethernet1/1)#switchport mac-address dynamic maximum 20
Switch (Config-If-Ethernet1/1)#switchport arp dynamic maximum 20
Switch (Config-If-Ethernet1/1)#switchport nd dynamic maximum 10
Switch (Config-if-Vlan1)#vlan mac-address dynamic maximum 30
26.4 The Number Limitation Function of Port, MAC in VLAN
Troubleshooting Help
The number limitation function of port, MAC in VLAN is disabled by default, if users need to limit the number of
SWITCH A
SWITCH B
PC PC
.........
PC
26-3
PC PC