Planet Networking & Communication WGSW-50040 Configuration Manual page 178

{{<dIpAddr> <dMask>} | any-destination |
{host-destination <dIpAddr>}} [precedence <prec>]
[tos <tos>][time-range<time-range-name>]
no access-list <num>
(3) Configuring a standard IP access-list basing on nomenclature
a. Create a name-based standard IP access-list
Global Mode
ip access-list standard <name>
no ip access-list standard <name>
b. Specify multiple "permit" or "deny" rules
Standard IP ACL Mode
[no] {deny | permit} {{<sIpAddr> <sMask>} |
any-source | {host-source <sIpAddr>}}
c. Exit name-based standard IP ACL configuration mode
Standard IP ACL Mode
exit
(4) Configuring an name-based extended IP access-list
a. Create an extended IP access-list basing on nomenclature
Global Mode
ip access-list extended <name>
no ip access-list extended <name>
Command
Command
Command
Command
24-7
numbered extended access-list of
specified number does not exist,
then an access-list will be created
using this number.
Deletes a numbered extensive IP
access-list.
Explanation
Creates a standard
access-list based
nomenclature; the
access-list
<name>" command deletes the
name-based standard
access-list.
Explanation
Creates a
name-based IP access rule; the
"no" form command deletes the
name-based standard
access rule.
Explanation
Exits name-based standard IP
ACL configuration mode.
Explanation
Creates an extended
access-list basing
IP
on
"no ip
standard
IP
standard
IP
IP
on