Planet Networking & Communication WGSW-50040 Configuration Manual page 131

ipv6 nd ra-lifetime <seconds>
no ipv6 nd ra-lifetime
(5) Configure router advertisement Minimum Interval
Command
Interface Configuration Mode
ipv6 nd min-ra-interval <seconds>
no ipv6 nd min-ra-interval
(6) Configure router advertisement Maximum Interval
Command
Interface Configuration Mode
ipv6 nd max-ra-interval <seconds>
no ipv6 nd max-ra-interval
(7) Configure prefix advertisement parameters
Command
Interface Configuration Mode
ipv6 nd prefix
<ipv6-address/prefix-length>
<valid-lifetime>
<preferred-lifetime> [off-link]
[no-autoconfig]
no ipv6 nd prefix
<ipv6-address/prefix-length>
<valid-lifetime>
<preferred-lifetime> [off-link]
[no-autoconfig]
(8) Configure static IPv6 neighbor Entries
Command
Interface Configuration Mode
ipv6 neighbor <ipv6-address>
<hardware-address> interface
<interface-type interface-number>
no ipv6 neighbor <ipv6-address>
Configure Router advertisement Lifespan. The
NO command resumes default value (1800
seconds).
Description
Configure the minimum interval for router
advertisement. The NO command resumes
default value (200 seconds).
Explanation
Configure the maximum interval for router
advertisement. The NO command resumes
default value (600 seconds).
Explanation
Configure the address prefix and advertisement
parameters of router. The NO command cancels
the address prefix of routing advertisement.
Explanation
Set static neighbor table entries, including
neighbor IPv6 address, MAC address and
two-layer port.
Delete neighbor table entries.
15-4