Planet Networking & Communication WGSW-50040 Configuration Manual page 163

query-interval <value>
no ip igmp snooping vlan <vlan-id>
query-interval
ip igmp snooping vlan <vlan-id>
immediately-leave
no ip igmp snooping vlan <vlan-id>
immediately-leave
ip igmp snooping vlan <vlan-id>
query-mrsp <value>
no ip igmp snooping vlan <vlan-id>
query-mrsp
ip igmp snooping vlan <vlan-id>
query-robustness <value>
no ip igmp snooping vlan <vlan-id>
query-robustness
ip igmp snooping vlan <vlan-id>
suppression-query-time <value>
no ip igmp snooping vlan <vlan-id>
suppression-query-time
ip igmp snooping vlan <vlan-id>
static-group <A.B.C.D> [source
<A.B.C.D>] interface [ethernet |
port-channel] <IFNAME>
no ip igmp snooping vlan <vlan-id>
static-group <A.B.C.D> [source
<A.B.C.D>] interface [ethernet |
port-channel] <IFNAME>
ip igmp snooping vlan <vlan-id> report
source-address <A.B.C.D>
no ip igmp snooping vlan <vlan-id>
report source-address
snooping vlan <vlan-id> query-interval"
command restores the default value.
Enable the IGMP fast leave function for the
specified VLAN: the "no ip igmp snooping
vlan <vlan-id> immediate-leave" command
disables the IGMP fast leave function.
Configure the maximum query response
period. The "no ip igmp snooping vlan
<vlan-id> query-mrsp" command restores to
the default value.
Configure the query robustness. The "no ip
igmp snooping
query-robustness" command restores to the
default value.
Configure the suppression query time. The
"no ip igmp snooping vlan <vlan-id>
suppression-query-time" command restores
to the default value.
Configure static-group on specified port of the
VLAN. The no form of the command cancels
this configuration.
Configure forwarding IGMP packet source
address, the no operation cancels the packet
source address.
21-20
vlan <vlan-id>