Planet Networking & Communication WGSW-50040 Configuration Manual page 64

5) Clear the list of candidate switches maintained by the switch
4． Configure attributes of the cluster in the candidate switch
1) Set the time interval of keep-alive messages of the cluster
2) Set the max number of lost keep-alive messages that can be tolerated in the cluster
5． Remote cluster network management
1) Remote configuration management
2) Remotely upgrade member switch
3) Reboot member switch
6． Manage cluster network with web
1) Enable http
7． Manage cluster network with snmp
1) Enable snmp server
1. Enable or disable cluster
Global Mode
cluster run [key <WORD>] [vid <VID>]
no cluster run
2. Create a cluster
Global Mode
cluster ip-pool <commander-ip>
no cluster ip-pool
cluster commander [<cluster_name>]
no cluster commander
cluster member {candidate-sn <candidate-sn>
| mac-address <mac-addr> [id <member-id> ]}
no cluster member {id <member-id> |
mac-address <mac-addr>}
3. Configure attributes of the cluster in the commander switch
Global Mode
cluster auto-add
no cluster auto-add
cluster member auto-to-user
cluster keepalive interval <second>
no cluster keepalive interval
Command
Command
Command
Explanation
Enable or disable cluster function in
the switch.
Explanation
Configure the private IP address pool
for cluster member devices.
Create or delete a cluster.
Add or remove a member switch.
Explanation
Enable or disable adding newly
discovered candidate switch to the
cluster.
Change
members into manually added ones.
Set the keep-alive interval of the
cluster.
5-2
automatically added