Planet Networking & Communication WGSW-50040 Configuration Manual page 141

dns-server
[<address1>[<address2>[...<address8>
]]]
no dns-server
domain-name <domain>
no domain-name
netbios-name-server
[<address1>[<address2>[...<address8>
]]]
no netbios-name-server
netbios-node-type
{b-node|h-node|m-node|p-node|<type-n
umber>}
no netbios-node-type
bootfile <filename>
no bootfile
next-server
[<address1>[<address2>[...<address8>
]]]
no next-server
[<address1>[<address2>[...<address8>
]]]
option <code> {ascii <string> | hex
<hex> | ipaddress <ipaddress>}
no option <code>
lease { days [hours][minutes] | infinite }
no lease
Global Mode
ip dhcp excluded-address
<low-address> [<high-address>]
no ip dhcp excluded-address
<low-address> [<high-address>]
(3) Configure manual DHCP address pool parameters
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|<type-number>}]
no hardware-address
Command
Configure DNS server for DHCP clients. The
no command deletes
configuration.
Configure Domain name for DHCP clients;
the "no domain-name" command deletes
the domain name.
Configure the address for WINS server. The
no operation cancels the address for server.
Configure node type for DHCP clients. The
no operation cancels the node type for
DHCP clients.
Configure the file to be imported for DHCP
clients on boot up. The no command
cancels this operation.
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated
to addresses in the address pool.
Exclude the addresses in the address pool
that are not for dynamic allocation.
Explanation
Specify/delete the
when assigning address manually.
18-3
DNS server
hardware address