Port Enable - TP-Link TL-SL5428E User Manual

24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs Also See for TL-SL5428E:
Table of Contents

Advertisement

Uvgr" Qrgtcvkqp"
4
Configure MAC
VLAN 10
5
Configure MAC
VLAN 20
6

Port Enable

Configure switch B
Uvgr" Qrgtcvkqp"
1
Configure
the
Link Type of the
ports
2
Create VLAN10
3
Create VLAN20
4
Configure MAC
VLAN 10
5
Configure MAC
VLAN 20
6
Port Enable
Configure switch C
Uvgr" Qrgtcvkqp"
1
Configure
the
Link Type of the
ports
2
Create VLAN10
3
Create VLAN20
808" Crrnkecvkqp"Gzcorng"hqt"Rtqvqeqn"XNCP"
Pgvyqtm"Tgswktgogpvu"
Department A is connected to the company LAN via Port12 of switch A;
Department A has IP host and AppleTalk host;
Fguetkrvkqp"
On XNCP→OCE"XNCP→OCE"XNCP"page, create MAC VLAN10 with
the MAC address as 00-19-56-8A-4C-71.
On XNCP→OCE"XNCP→OCE"XNCP"page, create MAC VLAN10 with
the MAC address as 00-19-56-82-3B-70.
Required. On the XNCP→OCE"XNCP→Rqtv"Gpcdng page, select and
enable Port 11 and Port 12 for MAC VLAN feature.
Fguetkrvkqp"
Required. On XNCP→:2403S"XNCP→Rqtv"Eqphki"page, configure the
link type of Port 21 and Port 22 as GENERAL and TRUNK respectively.
Required. On XNCP→:2403S" XNCP→XNCP" Eqphki" page, create a
VLAN with its VLAN ID as 10, owning Port 21 and Port 22, and
configure the egress rule of Port 21 as Untag.
Required. On XNCP→:2403S" XNCP→XNCP" Eqphki" page, create a
VLAN with its VLAN ID as 20, owning Port 21 and Port 22, and
configure the egress rule of Port 21 as Untag.
On XNCP→OCE"XNCP→OCE"XNCP"page, create MAC VLAN10 with
the MAC address as 00-19-56-8A-4C-71.
On XNCP→OCE"XNCP→OCE"XNCP"page, create MAC VLAN10 with
the MAC address as 00-19-56-82-3B-70.
Required. On the XNCP→OCE"XNCP→Rqtv"Gpcdng page, select and
enable Port 21 and Port 22 for MAC VLAN feature.
Fguetkrvkqp"
Required. On XNCP→:2403S"XNCP→Rqtv"Eqphki"page, configure the
link type of Port 2 and Port 3 as GENERAL, and configure the link type
of Port 4 and Port 5 as ACCESS.
Required. On XNCP→:2403S" XNCP→XNCP" Eqphki" page, create a
VLAN with its VLAN ID as 10, owning Port 2, Port 3 and Port 5,
Required. On XNCP→:2403S" XNCP→XNCP" Eqphki" page, create a
VLAN with its VLAN ID as 20, owning Port 2, Port 3 and Port 4,
73

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-SL5428E and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents